UHU two-component epoxy adhesive PLUS endfest 90 min EPOXY 24 ml/25 g

Product detailed description

The excellent quality of this high-strength two-component epoxy adhesive ensures strong bonding and repairs with a strength of 300 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -40°C to +100°C. After hardening, it can be drilled and painted. SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, polystyrene foam, etc., both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The parts to be bonded must be clean, dry and degreased. Remove the cap of the double-syringe. Squeeze out the filler and hardener in a volume ratio of 1:1 (two equal strips) and mix thoroughly. The workability of the adhesive is 90 minutes at room temperature. Apply the adhesive on one side, on both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean the ends properly and close (the cap must be broken off from the pistons of the double-syringe). The curing time and the final functional strength depend on the applied temperature - see table. The minimum working temperature is 15°C. Store in a dry and cool place. Temperature [°C] Time Strength [kg/cm2] 20 ... 12 hours ... 120 40 ... 3 hours ... 150 70 ... 45 minutes ... 200 100 ... 10 minutes ... 250 180 ... 5 minutes ... 300