UHU two-component epoxy adhesive PLUS 5 min schnellfest EPOXY 24 ml/27 g

Product detailed description

The excellent quality of this fast-drying two-component epoxy adhesive ensures fast, clear and strong bonding and repairs with a strength of 130 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -40°C to +100°C. The adhesive is crystal clear after curing. SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc. both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The bonded parts must be clean, dry and degreased. Remove the cap of the double-syringe, squeeze out the filler and hardener in a ratio of 1:1 (two equal strips) and mix thoroughly - the workability of the adhesive is 5 min. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix for 20 min (using clamps or tape). Clean and close the ends of the double-syringe properly. At room temperature, the joint reaches handling strength after 20 minutes. The joint reaches its highest functional strength after 72 hours. The minimum working temperature is 15°C. Store in a dry and cool place. Strength table depending on temperature and time: Time Strength [kg/cm 2 ] 10 minutes ... 15 30 minutes ... 90 60 hours ... 110 72 hours ... 180