UHU two-component epoxy adhesive Plus 5 min EPOXY 30 ml/35 g

Product detailed description

The excellent quality of this fast-drying two-component epoxy adhesive ensures fast, clear and strong bonding and repairs with a strength of 190 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -20 °C to +100 °C. The adhesive is crystal clear after curing. SCOPE OF APPLICATION: Suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc. Both between themselves and with others. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The parts to be bonded must be clean, dry and degreased. Remove the cap of the dual-sprayer, squeeze out the filler and hardener in a ratio of 1:1 (two equal strips) and mix thoroughly - the workability of the adhesive is 5 min. Apply adhesive to one side or both sides in the case of coarse and porous materials, press both surfaces together and fix for 20 min (using clamps or tape). Clean and seal the ends of the double joint properly. At room temperature, the joint reaches handling strength after 20 min. The joint reaches its highest functional strength after 72 hours. The minimum working temperature is 15 °C. Store in a dry and cool place. Strength table depending on temperature and time: Time Strength [kg/cm 2 ] 10 minutes ... 15 30 minutes ... 90 60 hours ... 110 72 hours ... 180