UHU two-component epoxy adhesive - hardener PLUS 5 min schnellfest EPOXY 855 g

Product detailed description

The excellent quality of this fast-drying two-component epoxy adhesive ensures fast, clear and strong bonding and repairs with a strength of 190 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -40°C to +100°C. The adhesive is crystal clear after curing. SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc. both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The bonded parts must be clean, dry and degreased. Mix the filler and hardener in a ratio of 1:1 and mix thoroughly - the workability of the adhesive is 5 minutes. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix for 20 minutes (using clamps or tape). At room temperature, the joint reaches handling strength after 20 minutes. The joint reaches its highest functional strength after 72 hours. The minimum working temperature is 15°C. Store in a dry and cool place. Strength table depending on temperature and time: Time Strength [kg/cm 2 ] 10 minutes ... 15 30 minutes ... 90 60 hours ... 110 72 hours ... 180 IMPORTANT INFORMATION: Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. In case of contact with skin, wash immediately with plenty of soap and water. If swallowed, do not induce vomiting and seek medical attention immediately. Wear suitable protective gloves and goggles. Do not empty into drains. CONTAINS: Filler: epoxy resin Hardener: amines Xi - Irritant N - Dangerous for the environment Do not empty into drains, dispose of this material and its packaging at a special or hazardous waste collection point. The cured adhesive is environmentally neutral. When used appropriately, the product is harmless to the user and the environment. WARNING: Hardener: not classified according to the CLP regulation.