Two-component epoxy adhesive PLUS 5 min quick-setting 50 ml

Product detailed description

The excellent quality of this two-component epoxy adhesive ensures fast, clear and strong bonding and repairs with a strength of 130 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -40°C to +100°C. The adhesive is crystal clear after curing. SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc. both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The parts to be bonded must be clean, dry and degreased. Insert the double cartridge into a special extrusion gun (cat. no.: 10582). Remove the cap of the double cartridge and attach the mixing tip (cat. no.: 10583). Now start to extrude the already mixed adhesive. If you interrupt the work for more than 5 minutes, replace the mixing tip. The workability of the adhesive is 5 minutes. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix for 20 minutes (using clamps or tape). Clean the ends of the double syringe properly and close them. At room temperature, the joint reaches its handling strength after 20 minutes. The joint reaches its highest functional strength after 72 hours. The minimum working temperature is 15°C. Store in a dry and cool place. Strength table depending on temperature and time: Time Strength [kg/cm2 ] 10 minutes ... 15 30 minutes ... 90 60 hours ... 110 72 hours ... 180