Srejsek hydroxide waste cleaner 1 kg

Product detailed description

Waste Shrew, a highly effective product for cleaning and removing unwanted grease, hair, paper, food residue and other impurities from waste pipes. The package contains 1,000 g.

Product use:
Pour 5-10 tablespoons (50-100g) of REJSEK waste cleaner into the sink or drain trap of the sink, bathtub, toilet, or floor drain, add 0.5l of hot water, and let the solution act for 20-30 minutes. Then rinse the pipes with warm water. Depending on the severity of the contamination, the procedure can be repeated several times. After finishing work, rinse the tools thoroughly with water.

Sodium hydroxide , lye, for cleaning drains and pipes, bleaching and dyeing textiles, degreasing baths. Not only for cleaning boilers, pipes and drains. Dosage is governed by the relevant working procedure. Sodium hydroxide is a hygroscopic substance. It absorbs carbon dioxide from the air. It dissolves easily in water and ethanol. A large amount of heat is released during dissolution. The solution reacts strongly alkaline.

Organic dirt, animal fur, hair, nails or hair can cause blockages in the bathroom, toilet and kitchen. These dirt will create a durable and solid barrier, making the flow of water practically impossible. Clogged toilets and drains are common practice and will appear in every household at some point. In households, lye is mainly used to clean water drains and pipes. It can easily cope with organic material of various kinds and will make the clogged drain accessible again within a few minutes.

Sodium hydroxide, commonly known as lye, is a very strong caustic. Other names for sodium hydroxide are also natron, sodium hydroxide or caustic soda. The chemical formula of lye is NaOH. Sodium hydroxide is not flammable or explosive, but it can decompose when exposed to heat and produce corrosive or toxic gases.

Properties of sodium hydroxide

• sodium hydroxide lye
• for cleaning drains and pipes
• bleaching and dyeing of textiles
• degreasing bath
• for cleaning boilers

GHS05 - corrosive and corrosive substances

Signal word: Danger

sodium hydroxide (Index: 011-002-00-6; CAS: 1310-73-2).