Savo 15kg Original

An effective product for disinfecting areas, surfaces and water (swimming pools, wells). It reliably kills bacteria, viruses, algae and microscopic fungi. It can be used as an all-season microbicidal and antifouling agent for swimming pool operation. Before using in a newly filled pool, it is necessary to measure and possibly adjust the water hardness.

For the first chlorination of the pool, use 160 ml of the product per 3 m³ of water . For regular disinfection, dose 80 ml of the product per 3 m³ of water every 2–3 days . In case of prolonged air temperatures above 25 °C and constant sunlight, we recommend applying this dose daily.

In case of algae , prolonged hot weather or increased traffic, dose 240 ml of the product per 3 m³ of water at a time . First mix the dose in 9 l of water , then pour it into the pool in parts.

Adding 160 ml of the product to 3 m³ of water increases the free chlorine content by approximately 2.5 mg/l (but it is immediately broken down). Therefore, use a test kit to measure free chlorine. For safe swimming, maintain its level at 0.3–0.5 mg/l .

Composition:

Disinfectant: sodium hypochlorite 4.7 g/100 g. Less than 5% chlorine-based bleaching agent (sodium hypochlorite).

 GHS05 - corrosive and corrosive substances  GHS09 - substances hazardous to the environment

Signal word: Danger

Sodium hypochlorite, solution, active chlorine content 95% sodium hydroxide.