PRO POOL liquid clarifier 1 l

Product detailed description

One of the most common problems encountered in pool water care is the formation of turbidity, which is caused by the presence of fine mechanical or organic impurities or residues from algae removal. By using the product FLOCKOVAC LIQUID, these fine particles are converted into a form that can be removed by filtration on sand or cartridge filters. Before adding the product to the pool, it is necessary to first adjust the pH of the water to a value of 6.5-6.8 with the product pH MINUS or pH PLUS according to the instructions on the packaging of these products.

Dosage:
Depending on the degree of water contamination, 10-50 ml of FLOCKOVAC LIQUID is dosed for every 10 m³ of water in the pool. The measured dose is diluted with water (50-100 ml of the product per 1 liter of water) and evenly dispersed over the surface of the pool with the water circulation turned on for about 4 hours to mix the product with the water. Then the circulation is turned off for 12 hours. During this time, flakes of precipitated dirt form in the water, which are then sucked off with a pool vacuum cleaner or are captured during filtration. If the pool water has not been adjusted to the desired quality, the entire procedure is repeated.

GHS07 - irritants

Signal word: Warning

polyaluminium chloride