OXI tablets MINI 1 kg

Product detailed description

Advantages and disadvantages

Use

1. Before applying the product, check the pH of the water with an appropriate tester.
2. Adjust the pH value to 6.8-7.4 using pH MINUS or pH PLUS products
3. In case of hard water, its hardness is stabilized with the HARDNESS STABILIZER product.
4. Then the initial water treatment is carried out with the OXI shock preparation, all according to the instructions given on these preparations.
5. Then , 1 OXI TABLETS MINI per 1.5-2 m3 of pool water is placed in the float or tablet container. This amount should be sufficient to maintain the required concentration of 5-16 mg/l of active oxygen in the water for 3 to 5 days, depending on factors that affect the amount of active oxygen in the water, such as air and water temperature, sunlight intensity and pool load.

If algae occurs, it is possible to perform a one-time water treatment with the OXI shock product according to the instructions on this product.

Notice

Follow the instructions for use. The product MUST NOT be used in combination with products containing chlorine in any form. The product must not come into direct contact with foil, plastic or pool paint, as it may discolor these materials and cause white spots.

Do not mix with other chemicals other than those mentioned. May only be used for water treatment in swimming pools.

Danger

May intensify fire; oxidizer. Harmful if swallowed. Causes severe skin burns and eye damage. If medical advice is needed, have product container or label at hand.

Keep out of reach of children. Avoid release to the environment. Wear protective gloves/protective clothing/safety glasses/face shield. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up.