FOR SWIMMING POOL hardness stabilizer 1l
Code: 118368Product detailed description
Advantages and disadvantages
| + Prevents limescale build-up + Can be combined with both active chlorine and oxygen + Binds metal ions + Does not restrict swimming | - Works best before dosing other chemicals - Does not dissolve already deposited minerals |
Use
Water hardness, caused by an increased content of certain minerals, e.g. calcium, magnesium or manganese salts, is often the cause of a number of problems when treating pool water, e.g. the development of undesirable water discoloration, turbidity or mineral deposits. If you suspect the possibility of hard water, especially when using water from wells, it is advisable to determine its hardness before filling the pool. If the water is hard, it is advisable to add this preparation immediately after filling the pool, which binds ions of calcium, magnesium, manganese and other minerals and blocks their undesirable effects.
The initial dose of the product is 250 ml per 10 m 3 of water , if the water is very hard (over 15°) 500 ml per 10 m 3 of water is dosed. To remove existing discoloration or turbidity and at the end of the season, always dose 500 ml per 10 m 3 of water, the measured amount is slowly poured into the skimmer with the water circulation turned on. The product is suitable for use when treating water with chlorine and chlorine-free products.
Notice
Follow the instructions for use. Do not mix with other chemicals. May only be used for swimming pool water treatment
Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid release to the environment. Collect spilled product. Dispose of contents/container as hazardous waste.
Additional parameters
| Category: | Pool chemistry |
|---|---|
| Weight: | 1.1 kg |
| EAN: | 8594019361525 |