FOR SWIMMING POOL COMBI tablets MAXI 1 kg

Product detailed description

Tablets containing 80% active chlorine, ensuring disinfection, flocculation of impurities when water becomes cloudy and eliminating algae.

Use:
Before applying the product, check the pH of the water with an appropriate tester, set the pH value to 6.8-7.6 using pH MINUS or pH PLUS products. In the case of hard water, its hardness is stabilized by adding HARDNESS STABILIZER. Then, initial chlorination is performed with CHLOR START, all according to the instructions given on these products. Then, 1 pc of KOMBI TABLETS MAXI per 20-30 m³ of water in the pool is placed in the float or tablet container. This amount should be sufficient to maintain the necessary concentration of 0.3-0.5 mg/l of active chlorine in the water for 5 to 10 days, depending on factors that affect the amount of active chlorine in the water, such as air and water temperature, sunlight intensity and pool load. The correct concentration of active chlorine and pH should be checked regularly with an appropriate tester. The product already contains substances that prevent algae growth, however, if algae occurs, it is possible to perform a one-time water treatment with the CHLOR SHOCK product according to the instructions on this product.

Notice:
Follow the instructions for use. The product must not come into direct contact with foil, plastic or pool paint, as it may discolor these materials and cause white spots. Do not mix with other chemicals. It may only be used for treating pool water.

Notice:
"Use biocides safely. Always read the label and product information before use!"

GHS07 - irritants GHS09 - substances hazardous to the environment

Signal word: Warning

symclosen 860 g/1kg, index number: 613-031-00-5