BISON wood glue WOOD GLUE D2 250 g

Product detailed description

High-quality and extremely strong PVAc-based wood glue for interior use, moisture-resistant (according to the ČSN EN 204 D2 standard). After drying, it is transparent. It is stronger than wood. It is resistant to temperatures from -20°C to +60°C. Coverage 2 - 4 m2/kg. If necessary, the glue can be diluted with water. SCOPE OF USE: Glues all types of soft and hard wood, fiberboard, chipboard, plywood, veneer, paper and cardboard. It is intended for wooden structures and tongue-and-groove joints. INSTRUCTIONS FOR USE: The surface must be clean, dry, free of dust and grease. Completely coat both surfaces. Wait two to three minutes for them to soak in. Join the parts and press them firmly or clamp them with clamps for one hour (recommended pressure is 2 - 5 kg/cm2). Drying time: 24 hours. Remove wet spots immediately with water. TIP: If the glued joint is exposed to moisture, use BISON SUPER WOOD or BISON PU MAX glue (if the joint will be exposed to permanent moisture). IMPORTANT: Do not use at temperatures below +5°C. Recommended wood moisture content 8% to 12%. After use, close the packaging properly and store in a dry, cool place protected from frost. Minimum shelf life is 24 months.