🎁 FREE lip balm with every order over €40 🔥

BISON universal neoprene assembly adhesive MONTAGEKIT SUPER STRONG 125 g

Code: 19030000ZT
6,70 € 5,45 € excl. VAT
Skladem

Detailed information

Product detailed description

Allows contact bonding (final strength after just 5 minutes) - replacement for screws and nails Universal - for absorbent and non-absorbent materials (for contact bonding) Super strong For use indoors and outdoors Good filling ability Permanently elastic Suitable for uneven surfaces With correction option Water resistant Temperature resistance from -20°C to +100°C Universal, high-quality construction adhesive based on CR rubber (chloroprene) for all types of building materials. It has excellent final strength, is elastic and is intended for use indoors and outdoors. No need to use screws or nails. Temperature resistance from -20°C to +100°C. Coverage: boards and larger areas 5 - 8 m2/kg, battens and smaller areas 4 - 6 m2/kg. SCOPE OF USE: Bonds wood, metals, plastics, plasterboard, stone, tiles, etc. to concrete, stone, plasterboard, wood and chipboard surfaces. Not suitable for polystyrene foam, PE and PP. INSTRUCTIONS FOR USE: Surfaces must be clean, dry, free of dust and grease. Bonding where at least one surface is absorbent (porous): apply adhesive to one surface at points spaced 20 to 30 cm apart and also in corners and along edges. Immediately join the parts and press or tap them firmly. Secure or support them as necessary. Drying time is 48 hours. Remove wet spots immediately with acetone. Contact bonding (Power Bonding) and bonding of non-absorbent (non-porous) materials apply adhesive to one bonded surface, place on the other surface, press and then separate the bonded parts. Let dry for five minutes, press them together again and press firmly (tap). TECHNICAL PROPERTIES: Moisture resistance: very good Water resistance: good Temperature resistance: from -20 to +100 degrees Celsius UV resistance: very good Chemical resistance: good Overcoatability: very good Flexibility: very good Filling ability: good TIP: Use BISON Montagekit Extreme Grip to bond materials requiring high initial adhesion. IMPORTANT: Use in the temperature range +5°C to +40°C. After use, close the packaging properly and store it in a dry, cool place protected from frost. The minimum shelf life is 24 months. It may shorten after opening.

Additional parameters

Category: Sealants, silicones and adhesives
Weight: 0.177 kg
EAN: 8710439044187

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Required fields

Do not fill out this field:

Security check