BISON painting acrylic ACRYLIC 30 MIN WHITE 300 ml

Product detailed description

The so-called painter's acrylate is a one-component water-based elasto-plastic sealant based on acrylic dispersion, odorless when drying with movement in the joint up to 12.5%. It can be repainted after just 30 minutes. USE: Suitable for jointing during the installation of plasterboard, for joints between masonry and window and door frames, suitable for repairing cracks in plaster, sealing during the installation of air conditioning, flexible jointing with the possibility of repainting in car repair shops (metal substrates must be coated). Very easy to repaint with common paints. Resistant to UV radiation, shows minimal drying. WORKING PROCEDURE: The substrate surfaces must be dust-free and degreased, moist up to 5% moisture. For a perfect joint on very porous materials, coat the substrate with a primer - dilute the sealant with water in a ratio of 2:1 and paint the substrate - the paint dries within 20 minutes. Cut the tip of the cartridge above the thread, screw on the application tip, cut it diagonally according to the width of the joint and use the extrusion gun to extrude the sealant in an even layer. You can mask the area around the joint with masking tape. Smooth the applied sealant within 10 minutes with a wet brush or spatula. Remove excess sealant with water; after drying, it can only be removed mechanically. Overcoating is possible after 30 minutes. The sealant is not suitable for permanent loads in a wet environment and for permanent elastic sealing. For these applications, use BISON SILICONE NEUTRAL. Temperature resistance from -20°C to +80°C. Application temperature from +5°C to +40°C.