Product detailed description
High final strength 180 kg/cm2. Highly resistant to extreme conditions (high load, high forces, vibrations, (sea) water, chemicals) Metallic color. Open processing time 45 minutes. Final strength 180 kg/cm2. Resistant to (sea) water, oils, solvents, diluted acids and alkalis. Heat resistance from -60°C to +100°C. Handling strength after 10 hours. Hardening after 24 hours. Fills joints and cracks After hardening, it can be sanded, painted, drilled SCOPE OF APPLICATION: It is particularly suitable for metal objects that require resistance to extreme conditions - for example chemicals, vibrations or sea water. Also suitable for bonding wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, polystyrene foam, some plastics (plastic, polyester, bakelite) etc. both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: Working temperature is +5°C to +35°C. The glued parts must be clean, dry and degreased. Remove the silver cap between the pistons. Break off the end part of the nozzles. Squeeze out a sufficient amount and mix well until you get a uniform color. Open processing time is 45 minutes. Apply the glue on one side, on both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean the ends properly and close them (the cap must be broken off the pistons of the double syringe). Store in a dry and cool place. TECHNICAL PROPERTIES: Moisture resistance: good Temperature resistance: from -60°C to +100°C Chemical resistance: very good Overcoatability: good Filling ability: good TIP: For transparent and very fast bonding, use BISON EPOXY 5 MIN.
