BISON epoxy plasticine EPOXY REPAIR 56 g

Product detailed description

It is a high-quality, very strong and hard two-component adhesive epoxy sealant of the new generation. It is designed specifically for extreme and permanent repairs. The adhesive sealant has no deformation, does not rust and is resistant to chemical media and temperatures from -20°C to +120°C. It can be machined, drilled, milled and sanded and painted after hardening. It glues, seals and fills cracks and holes in concrete, wood, metals and plastics. SCOPE OF USE: Suitable for metals (e.g. steel, cast iron, aluminium), wood, laminate, ceramics, porcelain, concrete, stone, marble and many plastics. Not suitable for bonding PP, PE, Teflon and rubber. INSTRUCTIONS FOR USE: The glued parts must be clean and degreased. Cut off the required amount of material and remove the protective film. Work the material until it has the same colour. Work the material firmly into the repaired area. The workability of the plasticine is 3-4 minutes depending on the temperature. It reaches handling strength after 7-10 minutes. It can be machined, drilled, milled, sanded and painted after 60 minutes. It reaches functional strength after 24 hours at room temperature. The minimum working temperature is +15°C. Store in a dry and cool place. TIP: Use BISON EPOXY REPAIR AQUA to bond and seal materials that are exposed to moisture or are placed directly under water.