BISON clear epoxy glue EPOXY 5 MIN 24 ml

Product detailed description

Transparent. Open time 5 minutes. Final strength 100 kg/cm2. Resistant to water, moisture, oils, solvents, diluted acids and alkalis. Heat resistance from -40°C to +100°C. Handling strength after 20 minutes depending on temperature. Hardening after 24 hours. Fills joints and cracks. Can be overcoated after hardening. SCOPE OF APPLICATION: Ideal for quick, strong and invisible repairs of mugs, porcelain, ceramics, glass, leather, wood, chipboard, stone, concrete, metals, thermosets, hard PVC, polystyrene foam, laminates, some plastics (Umakart, polyester, Bakelite) etc., both between themselves and to each other. Thanks to its filling ability, ideal for filling cracks. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: Working temperature is +5° to +35°C. The parts to be glued must be clean, dry and degreased. Remove the red cap between the pistons. Break off the end part of the nozzles. Squeeze out a sufficient amount and mix well until you get a uniform color. Open processing time is 5 minutes. Apply the glue on one side, on both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean the ends properly and close (the cap must be broken off from the pistons of the double-syringe). Store in a dry and cool place. TECHNICAL PROPERTIES: Moisture resistance: good Temperature resistance: from -40°C to +100°C Chemical resistance: good Filling ability: good