UHU two-component epoxy adhesive - resin PLUS endfest 300 EPOXY 5 kg

Product detailed description

The excellent quality of this high-strength two-component epoxy adhesive ensures strong bonding and repairs with a strength of 300 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a high heat resistance from -40°C to +100°C. After hardening, it can be drilled and painted. SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, polystyrene foam, etc., both between themselves and with each other. Not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The bonded parts must be clean, dry and degreased. Extrude the filler and hardener in a volume ratio of 1:1 (two equal strips) and mix thoroughly. The workability of the adhesive is 90 minutes at room temperature. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Close the packaging properly. The curing time and final functional strength depend on the applied temperature – see table. The minimum working temperature is 15°C. Store in a dry and cool place. Strength table depending on temperature and time: Temperature [°C] Time Strength [kg/cm2] 20 ... 12 hours ... 120 40 ... 3 hours ... 150 70 ... 45 minutes ... 200 100 ... 10 minutes ... 250 180 ... 5 minutes ... 300