Tapuna for cleaning irons from burnt-on dirt 55 g

Product detailed description

A fusible agent for cleaning irons. Irons used in households gradually develop a coating that makes ironing difficult. (Burns caused by improperly set temperature, etc.)

• Melting agent for cleaning irons from burnt-on dirt.
• Highly effective melting agent for cleaning burnt-on ironing surfaces on irons.
• Can be used on all surfaces - aluminum, stainless steel, Teflon and ceramic.
• It removes burnt-on dirt without damaging the ironing surface of the iron.

Use

• Let the iron heat up to a temperature suitable for ironing cotton to linen (approx. 135-140oC).
• Remove the necessary part of the product packaging.
• Hold the iron in a horizontal position, apply an appropriate amount of TAPUNA.
• The resulting melt must foam (condition for effect).
• If foam does not form, this indicates a low iron temperature, in which case cleaning is ineffective and must be repeated.
• Carry out cleaning in a ventilated room, as the reaction releases a small amount of ammonia.

Wipe off the foamed dirt with a suitable, preferably cotton, cloth. For heavily soiled surfaces, the procedure must be repeated.

BEWARE of burns - you are working at high temperature!

You can wash the cloth used to wipe the iron in water and reuse it.
Unwanted stains from TAPUNA (caused by dripping the melt onto clothing, carpet or furniture) can also be easily removed with water.

One pack of TAPUNA is enough for five or more uses, depending on the degree of soiling of the iron.
When cleaning, remove only the necessary part of the packaging, as the product is slightly moist.

Store it in a dry environment!
Regular use of TAPUNA will make ironing easier!