BISON mounting adhesive for polystyrene POLYSTYRENE 470 g

Product detailed description

High final strength Good filling ability Solvent-free Intended primarily for interiors Moisture resistant Permanently elastic Possibility of joint correction Temperature resistance from -20°C to +100°C The substrate must be absorbent Dispersion adhesive ready for immediate use for bonding polystyrene foam, insulation boards and decorative panels. The substrates must be porous. Temperature resistance from -20°C to +100°C. Coverage: boards and larger surfaces 5 - 8 m2/kg, battens and smaller surfaces 4 - 6 m2/kg. SCOPE OF USE: Bonds insulation boards, panels, ceiling tiles and polystyrene foam foils to porous substrates such as wood, plaster, concrete, stone, etc. INSTRUCTIONS FOR USE: Surfaces must be clean, dry, free of dust and grease. Apply the adhesive to one surface in dots (3 - 4 cm) with a spacing of 20 to 30 cm and also in corners and along the edges. Immediately join the parts and press them firmly. Secure or support them as necessary. Drying time: 24 hours. Clean stains and tools from the adhesive immediately with water. TECHNICAL PROPERTIES: Moisture resistance: good Water resistance: limited Temperature resistance: from -20 to +100 degrees Celsius UV resistance: very good Chemical resistance: good Overpaintability: very good Flexibility: good Filling ability: good TIP: for applications on non-absorbent (non-porous) materials such as polystyrene, metal, varnished wood, ceramic tiles, etc. use BISON POLY MAX. IMPORTANT: Use in the temperature range +5°C to +40°C. After use, close the packaging properly and store in a dry, cool place protected from frost. Minimum shelf life is 24 months.