ALTECO two-component epoxy adhesive Epoxy Stell 30 min 56.8 g

Product detailed description

This is the so-called liquid metal for the most demanding repairs, bonding and cold adhesive welding. This two-component, very strong epoxy adhesive allows you to bond and repair joints with a high shear strength of at least 130 kg/cm2. Heat resistance is -20°C to +120°C after curing. PROPERTIES: it is gray in color contains steel powder has filling properties is thermally conductive is not electrically conductive cures in 24 hours SCOPE OF APPLICATION: It is suitable for bonding metals, wood, chipboard, hard plastics, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc. both between themselves and with each other. It is not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The bonded parts must be clean, dry and degreased. Extrude the filler and hardener in a volume ratio of 1 : 1 (two equal strips) and mix thoroughly. The workability of the adhesive is 30 minutes at room temperature. Apply the adhesive to one side, or to both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean and close the ends of the tubes thoroughly. Final functional strength after 24 hours. Minimum working temperature is 15°C. Store in a dry and cool place. TECHNICAL DATA: Appearance: grey paste Viscosity (cP/25°C): 106 Specific gravity (25°C/4°C): (A) 1.7; (B) 1.5 Tensile shear strength (kg/cm2): min. 130 Workability (min.): 30 Handling strength (min.): 90 Functional strength (hrs): 24 Hardness (Shore-D): 80 Mixing ratio: 1 : 1 by volume Heat resistance (°C): -20°C to +120°C