ALTECO two-component epoxy adhesive Epoxy Clear 5 min 20 g

Product detailed description

Two-component, very strong epoxy adhesive for repairs and bonding. It is clear and bonds joints that fit very precisely together. It has very high strength even with a thin layer of adhesive. It cures in 24 hours. It is one of the top adhesives that allows you to bond and repair even the most demanding joints with a high shear strength of at least 140 kg/cm2. It has a long workability time (5 minutes). After curing, the heat resistance is -20°C to +100°C. SCOPE OF USE: It is suitable for bonding metals, wood, chipboard, hard plastics, laminate, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam, etc., both between themselves and with each other. It is not suitable for bonding PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The glued parts must be clean, dry and degreased. Extrude the filler and hardener in a volume ratio of 1 : 1 (two equal strips) and mix thoroughly. The workability of the adhesive is 5 minutes at room temperature. Apply the adhesive on one side, on both sides for rough and porous materials, press both surfaces together and fix (using clamps or tape). Clean and close the ends of the tubes properly. Final functional strength after 24 hours. Minimum working temperature is 15°C. Store in a dry and cool place. TECHNICAL DATA: Appearance: transparent liquid Viscosity (cP/25 °C): (A) 10000–15000; (B) 40000–50000 Specific gravity (25 °C/4 °C): (A) 1.16–1.18; (B) 0.97 Tensile shear strength (kg/cm2): min. 140 Workability (min.): 5 Handling strength (hrs): 7 Functional strength (hrs): 24 Hardness (Shore-D): 80 Mixing ratio: 1 : 1 by volume Thermal resistance (°C): -20°C to +100°C