BISON rearview mirror glue CAR MIRROR 2 ml

Product detailed description

Very strong special transparent adhesive for gluing rear-view mirrors to safety glass. The set is designed for gluing two rear-view mirrors (contains 2x grids and adhesive). The adhesive is designed for gluing mirrors that have a metal base. If you are gluing a mirror with a plastic base, use BISON CAR TAPE. It withstands temperatures from -50°C to + 150°C. SCOPE OF USE: Rear-view mirrors with a metal base. INSTRUCTIONS FOR USE: The glued parts must be clean, dry and degreased. Mark the glued area on the safety glass. Cut out the grid to the size of the rear-view mirror base. Apply a sufficient amount of adhesive to the rear-view mirror base and attach the wire grid. Press the rear-view mirror onto the marked part of the safety glass and fix for at least 1 minute. The bonded joint reaches handling strength after 15 minutes and functional strength after 72 hours. Remove uncured adhesive with acetone, cured adhesive only mechanically. Store in a dry and cool place. IMPORTANT: Do not use at temperatures below +10°C.